SAR Testing and RF Exposure Evaluations

We are a fast, agile, and flexible partner for your RF exposure and SAR testing needs. With more than 20 years of experience in SAR testing, we can support you throughout the product development life cycle, from the conception phase to the certification phase.

Specific Absorption Rate (SAR) is a measure which explains how much radio frequency energy is absorbed by the user’s or bystander’s body or head.

SAR testing must be done on radio devices that are used closer than 20 cm to the human head or body. Devices used further away shall undergo an RF exposure evaluation.

There are different ways to show RF exposure compliance. See what are the options for testing RF exposure and how to prepare for the SAR testing process.

We can test the following technologies & products

  • 2G, 3G, 4G and 5G (FR1) cellular devices, satellite, TETRA, BLE, VHF, UHF, DECT, RFID, NFC, COSPAS-SARSAT and WLAN 2.4GHz, 5GHZ and 6GHz devices

SAR Testing Capabilities

  • CE, FCC & ISED SAR Testing
  • Pre-Compliance Testing
  • Head, Body, Extremity Capability
  • Whole-Body SAR Measurement
  • Test Frequencies between 4MHz -10GHz
  • In Non-Signaling and Signaling Modes
  • Dielectric Parameter Validation
  • SAR testing from user equipment to large base station antennas size up to 900mm x 1400mm
  • SAR and ADR capability
Limb SAR

We are also able to test limb SAR. From 1st July 2020, France requires limb SAR to be tested, in addition to the head and body SAR. Distributors must display SAR values provided by the manufactures of each appliance put on sale from 1st July 2020 at the point of sale or distribution.

Consumer protection has driven an increase in SAR testing and regulations. We at Verkotan are aware of these updated regulations.

Pre-compliance and compliance SAR testing
Pre-compliance

Pre-compliance SAR testing. SAR testing during the product development phase is called pre-compliance SAR testing. Pre-compliance SAR test gives an indication if the product will pass the mandatory SAR testing when the product is otherwise ready. SAR testing during the product development phase helps to locate possible issues already in the R&D stage and gives an indication of the SAR level for the final product.

Locating the possible problems in an early phase, costly design errors can be avoided, and the product design can be developed towards the right direction from the beginning. Resolving the observed SAR issues in an early phase ensures more predictable certification costs and early access to the market.

 

Compliance SAR testing

Compliance SAR testing . Compliance SAR testing is required for all the radio devices that are used closer than 20 cm to the human head or body. We have the capability to perform SAR testing for example for CE, FCC, ISED certifications.

Download Verkotan's example SAR test report

Test Facilities

Verkotan’s SAR test facilities are fully equipped with the premier supplier of SAR evaluation systems and government-preferred vendor: SPEAG.

We are using DASY SAR test systems with a robotic arm, equipped with probes, tissue simulants, and multiple different phantoms such as twin SAM, ELI and Base Station Phantoms.

DASY is capable of evaluating products for SAR to all the global SAR standards for both head and body-worn devices.

What is required for SAR testing?

Youtube-embeds requires use of third-party cookies. Please accept marketing-cookies to watch this video. Click here to accept

Standards we test according to:

Our testing is carried out according to standards and specifications in the US, Canadian, European, and Japanese markets:

  • US – FCC Knowledge Database Publications on RF Exposure
  • Canada – RSS-102, SPR-002
  • EU – EN 50357, EN 50360, EN 50383, EN 50385, EN 50566, EN 62209-1, EN 62209-2, EN 62232, EN 62311, EN 62479
  • International – IEC 62209-1, IEC 62209-2, IEC 62311, IEEE 1528, IEC/IEEE 62209-1528
Verkotan SAR Services

Youtube-embeds requires use of third-party cookies. Please accept marketing-cookies to watch this video. Click here to accept

Verkotan SAR testing procedure

Youtube-embeds requires use of third-party cookies. Please accept marketing-cookies to watch this video. Click here to accept

Contact our Sales

Want to know more?

We are happy to hear your needs and see if we can help you with them.

Kari Komonen

Co-Founder & CEO

+358 40 500 1241

Ilpo Vilén

Sales & Marketing Manager

+358 44 240 4198

Timo Ulkoniemi

Sales & Marketing Manager

+358 40 8469063

Related News

How Verkotan’s Pre-Compliance Testing Boosts Efficiency, Reduces Costs, and Ensures Success

Pre-compliance testing helps identify design issues early, saving time and costs. Learn more about how these testing solutions can simplify your development process, improve your design, and help you confidently launch your product with confidence. Read more

Verkotan Advances Nerve Stimulation Testing with DASY8 Module WPT V2.6+

Verkotan enhances nerve stimulation testing with the DASY8 Module WPT V2.6+, ensuring compliance with safety standards and supporting wireless technology development. Read more

Why to Choose Verkotan for RF Exposure Testing Services?

Continue reading to find out why Verkotan is a great partner for your RF exposure testing needs. Read more

NEWS: SAR Value Surveillance on Markets

SAR value market surveillance made by authorities is an important part of making sure that consumer devices comply with the required SAR safety limits. Verkotan offers SAR testing services for different authorities globally to make radio- and telecommunications equipment supervision efficient. Read more